CD ADSL MICROFILTER ADAPTOR
Price : £1.10
A faceplate filter/splitter of the type installed by the BT engineer for an installed ADSL service.
IMPROVES BROADBAND SPEED AND RELIABILITY* (*although not guaranteed to be any different)
It replaces the lower half of the BT NTE5a or NTE5b master socket and provides two outlets on the faceplate, one is an RJ11 socket (wired "straight through", unfiltered) for the connection of ADSL modems, the other is a BT 431A socket which is filtered for the connection of telephony equipment.
A 3-way IDC connector on the rear also provides a filtered output to any extension sockets (new 6 way are also available).
This unit is ideal if you have one computer within reasonable distance of the master socket, if all the other sockets are for telephony use you don't need microfilters at each outlet.
DO NOT PUT ADDITIONAL FILTERS ON EXTENSIONS
* Tested by BT to SIN issue 2.2
* Compatible with caller display (doesn't strip out the caller ID information)
* CE marked - BS EN55022
* Moulded from VO rated material colour matched to BT 1P white
* Dimensions (HxWxD): 68x84x30mm (excluding protruding connector plug)
Note: The NTE5 master socket is the type that when the lower half is un-plugged, it isolates the BT network side from the subscriber.
Any ADSL modems connected to the filtered output, either via the socket on the front or connected into hardwired extension sockets wired from the rear, will not function from these filtered outputs.
Some faceplates are branded BT, some are plain - all are made in the same factory
Does not include NTE5a socket pictured
Price : £13.99
These high quality filter/splitters are designed for use with both ADSL installations of up to 5km from the exchange and higher speed lines such as DSL Max, ADSL2 and ADSL2+. Designed to exceed the BT SIN #346 specification, this filter is ideal for difficult installations where a lesser specified filter results in synchronization issues, synchronization loss, CLI not showing or erratic etc. If it will not work with this filter, it will not work with any filter!
Suitable for use with telephones, fax machines, digiboxes and caller ID units.
Wire length approx 10cms.
Price : £3.70
The BT ADSL microfilter protects telephone devices (telephones, fax machines and answering machines) from audible noise generated by an ADSL modem connected to the same extension wiring.
Price : £4.29
CAT5e (100Mhz) Ethernet 10BaseT & 100BaseT RJ45 - RJ45 LAN (Local Area Network) This is a patch cable (also called straight or straight-through cable) - used for connecting PC's to hubs, network switches, routers, DSL and ADSL modems.
Price : £3.78
10m ADSL Cable - Premium Quality / Gold Plated Contact Pins / High Speed Internet Broadband / Router or Modem to RJ11 Phone Socket or Microfilter / White
Price : £3.95
A quality ADSL Broadband filter at a great price. Fully BT Labs tested - BT certified. Dynamode make qreat products at a price that can t be beat This filter is for UK broadband lines, fitting in a standard BT plug socket and splitting the signal into Voice and Data, providing a BT socket for a phone and an RJ11 socket for a ADSL modem. Other info For POTS voice band service, the M-ADSL-Filter provides protection from ADSL signals, which may impact through non-line or other remote devices (handset, fax, voice band modem etc) and central office operations. For ADSL signals, it also provides protection from the high frequency transient and impedance effect that occur during POTS operations (ringing transients, on-hook, off-hook transient and so on). Because the POTS splitter in the M-ADSL-Filter connects directly to the subscriber loop media, it also provides some protection for externally induced line hits or faults which could damage any attached equipment or endanger people interacting with the installed equipment. The circuit protection will be provided mostly by standard central office line protection means and additional protection measures built into the POTS splitter to protect against line overstress, which could damage the splitter itself. Features: All requirements for this specification can be met in the presence of all POTS loop currents from 0 mA to 100 mA. This Single In-Line filter can pass POTS tip-to-ring DC voltages of 0 V to 105 V and ringing signals of 40 Vrms to 150 Vrms at any frequencies from 15.3 Hz to 68 Hz superimposed on DC voltages in the range from 0 V to 105 V. The DC resistance from tip-to-ring at the line port interface with the phone interface shorted, shall be less than or equal to 50 ohms for one filter. The DC resistance from tip-to-ground and from ring-to-ground at the Phone interface with the Line interface open shall be greater than or equal to 10 Megohms. The ground point shall be local building or green wire ground. As
Price : £0.99
Brand new RJ11 male to male Broadband ADSL cable, to connect your ADSL Microfilter or Telephone Socket to your Broadband Modem. Ideal for long distance internet connections! Suitable for any ADSL modem and any Broadband internet Service Provider (ISP). We sell this cable in 2m, Aprox 5m, 10m, 15m and 20m lengths. Colours may vary.
Price : £1.09
